Volvo XC90 2015-2026 Owners Manual / Climate control / Activating and deactivating power front seats

Volvo XC90: Climate control / Activating and deactivating power front seats

(Option/accessory)

The seats can be heated for added comfort for the driver and passengers in cold weather.

  1. Volvo XC90. Activating and deactivating power front seats Tap the left- or right-side steering wheel and seat button in the center display's climate bar to open the controls for steering wheel and seat heating.
    • If the vehicle is not equipped with ventilated seats or heated steering wheel (for the driver's side), the button for seat heating is directly accessible in the climate bar.
  2. Volvo XC90. Activating and deactivating power front seats Tap the seat heating button repeatedly to select one of the four levels: Off, High, Medium or Low.
    • The level is changed and the set level is displayed in the button.

WARNING

Heated seats should not be used by people who have difficulty detecting temperature increases due to nerve damage or numbness or who for another reason may have difficulty operating the controls for seat heating.

    Climate system controls

    The climate system functions are controlled from physical buttons on the center console, the center display, and the climate panel on the rear side of the tunnel console*...

    Activating and deactivating the heated front seat

    (Option/accessory) The seats can be heated for added comfort for the driver and passengers in cold weather. Seat heating can be set to automatically activate when the engine is started...

    Other information:

    Volvo XC90 2015-2026 Owners Manual: Programming HomeLink®


    (Option/accessory.) (Certain markets only.) Follow these instructions to program HomeLink®, reset all programming, or program individual buttons. NOTE In some vehicles, the ignition must be on or in the "accessory position" before HomeLink® can be programmed or used...

    Volvo XC90 2015-2026 Owners Manual: Cruise control standby mode


    Cruise control (CC1) can be deactivated and put in standby mode. This may happen automatically or be due to driver intervention. Standby mode means that the function is selected in the instrument panel but not activated. In standby mode, cruise control will not regulate speed...

    Copyright © 2026 www.voxc90.com