Volvo XC90: Driver support / Curve Speed Assist (CSA)
(Option/accessory.)
(Depending on market, this function can be either standard or optional.)
Curve Speed Assist can help the driver reduce speed before sharp turns
if the preset speed for the driver support function Adaptive Cruise Control* or
Pilot Assist* is determined to be too high.
As the function reduces the vehicle's
speed, this symbol will be displayed in the instrument panel.
This assessment is performed using information from map data in the vehicle's
navigation system, Sensus Navigation*. After the turn, the vehicle will resume the
previously set speed.
The driver can cancel the function at any time by braking or using the accelerator
pedal.
WARNING
- The function is supplementary driver support intended to facilitate
driving and help make it safer – it cannot handle all situations in all traffic,
weather and road conditions.
- The driver is advised to read all sections in the Owner's Manual about
this function to learn of its limitations, which the driver must be aware of
before using the function.
- Driver support functions are not a substitute for the driver's attention
and judgment. The driver is always responsible for ensuring the vehicle is driven
in a safe manner, at the appropriate speed, with an appropriate distance to
other vehicles, and in accordance with current traffic rules and regulations.
Drive modes
Cornering assistance varies depending on the selected drive mode. If drive mode
cannot be selected, the function will use the Comfort option. In Dynamic
mode, cornering will be sporty, with slightly more powerful acceleration coming
out of curves.
* Option/accessory.
(Option/accessory.)
(Depending on market, this function can be either standard or optional.)
A number of symbols and messages relating to Pilot Assist may be displayed
in the instrument panel and/or the head-up display*...
(Option/accessory.)
The Curve Speed Assist (CSA) function can be activated as a supplement to
Adaptive Cruise Control* or Pilot Assist*. The driver can also deactivate the function...
Other information:
City Safety1 is always active, but the function's warning distance
can be adjusted.
NOTE
The City Safety function cannot be deactivated. It is activated automatically
each time the engine/electric motor is started.
The alert distance determines the sensitivity of the system and regulates the
distance at which the light, sound and brake pulsations will be activated...
If you experience any problems with the electrical functions for the power
windows, you can try to perform a reset.
WARNING
If the starter battery is disconnected, the function for automatic opening
and closing must be reset to function correctly. A reset is required in order for
the pinch protection to work...