Volvo XC90: Media player / Connecting the vehicle to the Internet via vehicle modem (SIM card)
It is possible to establish an Internet connection via the vehicle modem and
a personal SIM card (P-SIM).
Vehicles equipped with Volvo On Call will use the vehicle modem Internet connection
for the services.
-
Insert a personal SIM card in the holder.
Note that the vehicle's card reader requires mini SIM cards.
- Tap Settings in the Top view.
- Tap Communication Vehicle
Modem Internet.
- Activate/deactivate by tapping to check/ uncheck the Vehicle modem Internet
box.
- If a different connection is being used, confirm the connection change.
- Enter the SIM card's PIN code.
- The vehicle will connect to the network.
NOTE
Please note that the SIM card used for Internet connection via P-SIM cannot
have the same telephone number as the SIM card used in the cellular phone. If the
same card is used for both, phone calls will not be connected properly to the cellular
phone. Use a SIM card with a separate phone number for the Internet connection or
a data card that does not handle phone calls and can therefore not interfere with
phone function.
Establish an Internet connection using Wi-Fi through Internet sharing (tethering)
from a phone and get access to the connected services in your vehicle...
Your vehicle is equipped with a modem that can be used to connect the vehicle
to the Internet. It is also possible to share this Internet connection over Wi-Fi...
Other information:
Regularly check the brake system components for wear.
To keep the vehicle as safe and reliable as possible, follow the Volvo service
schedule specified in the Warranty and Maintenance Records Information booklet.
After replacing brake pads and brake discs, braking effect is not adapted until
they are "broken in" by driving a few hundred kilometers (miles)...
If the start battery is discharged, current from another battery can be used
to start the vehicle.
Jumper cable connecting points. Engine compartment appearance
may vary depending on vehicle model and equipment level.
To avoid short circuits or other damage, the following steps are recommended
when jump starting the battery using another battery:
Put the ignition in mode 0...