Volvo XC90: Key, locks and alarm / Locking and unlocking with detachable key blade
The detachable key blade can be used to unlock the vehicle from the outside,
e.g. if the battery in the remote key is discharged.
Unlocking
Pull the front left-hand door handle
to its end position to access the lock cylinder.
Put the key in the lock cylinder.
Turn the key clockwise 45 degrees
so that the key blade is pointing straight rearward.
Turn the key blade back 45 degrees
to its original position. Remove the key from the lock cylinder and release the
handle so that it returns to its original position against the vehicle.
- Pull the door handle.
NOTE
When the door is unlocked using the detachable key blade and then opened,
the alarm will be triggered. The alarm must be deactivated manually; see separate
section.
Locking
The left-hand front door can be locked by inserting the detachable key into the
door's lock cylinder.
The other doors have lock mechanisms in the side of the door that must be pushed
in using the key blade. The door will then be locked mechanically and cannot be
opened from the outside.
The doors can still be opened from inside.
Manual door lock. This is not the child lock.
- Remove the detachable key blade from the remote key.
- Insert the key blade into the opening for the lock mechanism.
- Push in the key until it stops, about 12 mm (0.5 inch).
The door can be opened from both
the outside and the inside.
The door cannot be opened from the
outside. To return to position A, open the door using the inside door handle.
NOTE
- The door's lock controls only lock that specific door, not all doors
simultaneously.
- A manually locked rear door with activated child lock cannot be opened
from either the outside or the inside. The door can only be unlocked using the
buttons on the key, the central locking button, the keyless locking system *
or Volvo On Call.
* Option/accessory.
The remote key contains a detachable metal key blade that can be used to activate
a number of functions and preform certain actions.
A Volvo workshop can provide you with the key blade's unique code, which is recommended
in case you need to order a new key blade...
The electronic immobilizer is a start inhibitor that helps prevent the vehicle
from being started by an unauthorized person.
The vehicle can only be started with the right remote key...
Other information:
Lane Keeping Aid (LKA1) is designed to actively steer the vehicle
on freeways, highways and other major roads to help the driver reduce the risk of
the vehicle unintentionally veering out of the lane.
Lake Keeping Aid steers the vehicle back into the lane and/or alerts the driver
using vibrations in the steering wheel...
Active high beams is a function that uses camera sensors in the upper edge
of the windshield to detect the headlights of approaching vehicles or the taillights
of the vehicle directly ahead. When either of these is detected, the vehicle's headlights
will automatically switch from high beams to low beams...