Volvo XC90: Starting and driving / Using HomeLink®
(Option/accessory.) (Certain markets only.)
Once HomeLink® is programmed, it can be used instead of the separate remote
controls. Press and hold the programming button. The garage door, gate, alarm
system, etc. will be activated (this may take several seconds). If the button is
held down for more than 20 seconds, reprogramming will begin. The indicator light
will glow steadily or flash when the button has been pressed. The original remote
controls may be used concurrently with HomeLink® if desired.
NOTE
When the ignition is switched off, HomeLink® will be active for at least
7 minutes.
NOTE
HomeLink® cannot be used if the vehicle is locked and the alarm is armed*
from the outside.
WARNING
If you use HomeLink® to open a garage door or gate, be sure no one is near
the gate or door while it is in motion.
Do not use HomeLink® with any garage door opener that lacks safety stop
and reverse features as required by U.S. federal safety standards (this includes
any garage door opener model manufactured before April 1, 1982). A garage door that
cannot detect an object - signaling the door to stop and reverse - does not meet
current U.S. federal safety standards. For more information, contact HomeLink at:
homelink.com.
(Option/accessory.) (Certain markets only.)
Follow these instructions to program HomeLink®, reset all programming, or
program individual buttons.
NOTE
In some vehicles, the ignition must be on or in the "accessory position"
before HomeLink® can be programmed or used...
(Option/accessory.) (Certain markets only.)
FCC (USA) and IC (Canada)
This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation
is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference that may be received
including interference that may cause undesired operation...
Other information:
Handling phone calls in the vehicle for a Bluetooth-connected cellular phone.
Generic illustration.
Making calls
Open the phone tile.
Initiate a call by selecting the phone number from the recent calls list,
entering the number on the keypad or selecting a number from the phone book
(list of contacts)...
(Option/accessory.)
The preconditioning timer can store up to 8 preset timer settings.
Adding a timer setting
Button for adding a timer setting in the Parking climate
tab in Climate view.
Open Climate view in the center display.
Select the Parking climate tab...